Alfatec 48 Turbo Yeast 100 gr

This product will be shipped by [page="merchant_info"]Katkıdeposu[/page] . Free returns within 15 days. For detailed information, click [page="return_conditions"][/page]. ALFASOL ALFATEC 48 TURBO YEAST Alfasol Alfatec 48 usage information is as follows WARNING! Alfasol Alfatec 48 Turbo Yeast - Since it is active turbo yeast, it may overflow as it works fast. To prevent this, we must leave 25% volume space in our container. Alfasol Alfatec 48 Turbo Yeast is a ready-to-use product. It contains yeast, nutrients, fermentation accelerators and acidity regulators. There is no need to add anything from outside. Note: Depending on the environmental conditions and the amount of sugar, 15-20% alcohol is obtained. If fermentation will be done in a carboy, · 12 liters of water · 4 Kg of sugar · 100 grams of Alfasol Alfatec 48 4 kg of sugar should be thoroughly dissolved in 12 liters of water. After the mixture is complete, the sugar water solution is poured into the bottle and 1 pack of 100 grams of Alfasol Alfatec 48 Turbo Yeast is poured over it and mixed a few times. Then, the mouth of the demijohn is closed so that no air gets in, and the water is discharged through a hose. There must be very good insulation around the hose and around the cover. Recommended fermentation temperature is 25 °C. Under optimum conditions, fermentation lasts between 48 and 72 hours. Fermentation is completed in approximately 5-6 days depending on the air temperature under current uncontrolled room conditions. Alfasol Alfatec 48 Turbo yeast starts to grow in an oxygenated environment and fermentation stops. In such an environment, it causes foaming and overflow. If we encounter such a situation, we must immediately isolate the air leakage point with the help of silicone, etc. Alfasol Alfatec 48 Turbo Yeast is a ready-to-use product. It contains yeast, nutrients, fermentation accelerators and acidity regulators. There is no need to add anything from outside. Since Alfasol Alfatec 48 is an active turbo yeast, it does not allow the suppression of fermentation and the formation of by-products even in non-sterile environments. You get a pure end product. However, we do not recommend using an airlock because it is Alfasol Alfatec 48 Turbo Yeast and works fast (to prevent overflow, etc.). Instead, it is better to discharge it into a separate container filled with some water via a hose.