Candle Dimensions Out of the Mold: 1 Leaf 1: 2-2Cm (Width from Outside to Outside) X 3-4Cm (Width from Outside to Outside) (Outside to Outer Width) Width) Outside to Outside Width) 0-9 (Outside to Outer Width) X 1-5Cm (Outer to Outer Width) 10 Sheets 10: 1-3 (Width from Outside to Outside) (Total) 1 Sheet 1: 1-80 Gr. 2 Sheets 2: 1-30 Gr. 3 Sheets 3: 0-95 Gr. 4 Sheets 4: 0-95 Gr. 5 Sheets 5: 1-80 Gr. 6 Sheets 6: 1-30 Gr. 7 Sheets 7: 0-80 Gr. 8 Sheets 8: 0-30 Gr. 9 Sheets 9: 0-60 Gr. 10 Sheets 10: 0-70 Gr. Mold Weight: 55 Gr. When you purchase the product in question, you can obtain 10 different models of leaf decoration molds from 1 mold. Molds are made of durable white silicone that is hard enough not to damage candle details. It is flexible - its inner surfaces are smooth and can be reused. It is recommended that you clean your molds with soapy water and dry them thoroughly before use. After use, the inside of the mold should be heated gently with a hot air gun and the wax residues should be wiped with a paper towel. Afterwards, it should be washed with soapy water, dried thoroughly and stored in an environment away from dust and direct sunlight. If Your Candle Mixture Is Colored, The Silicone Mold May Change Color After Wax Casting. If you comply with the cleaning and storage conditions, this will not cause a color transition for your subsequent wax castings. No holes were drilled on the mold surface. Before pouring the wax, it is recommended that you determine the point where you will place the rope and open the holes with the help of a pointed object. It is also recommended that you determine the cutting location for this mold yourself and after the cutting process, compress the cut areas with a strong rubber band and pour the wax into the mold in this way. The product in question is also compatible with soap-concrete-epoxy-scented stone and plaster castings, except for candle molds. It is not recommended to use it for food products. The candles you see in the images are not included in the sale. This ad was published with rufusconcept.com.