Candle dimensions coming out of the mold: 5 cm (width) The molds are made of durable white silicone that is hard enough not to damage the candle details. It is flexible - its inner surfaces are smooth and can be reused. It is recommended that you clean your molds with soapy water and dry them thoroughly before use. After use, the inside of the mold should be heated slightly with a hot air gun and the wax residues should be wiped off with a paper towel. Afterwards, it should be washed with soapy water, dried thoroughly and stored in an environment away from dust and direct sunlight. If your wax mixture is colored, the silicone mold may change color after pouring the wax. If you comply with the cleaning and storage conditions, this will not cause color transfer in your subsequent wax castings. No holes were opened on the mold surface. Before pouring the wax, it is recommended that you determine the spot where you will place the rope and open the holes with the help of a sharp object. It is also recommended that you determine the cutting location for this mold yourself and after the cutting process, compress the cut areas with a strong rubber band and pour the wax into the mold in this way. The product in question is also compatible for soap-concrete-epoxy-scented stone and plaster castings, except for candle molds. It is not recommended to use it for food products. The candles you see in the images are not included in the sale.
EN − EUR
